44533 Exposure Head Interface EHI: The monitor command requires application protocol 0 Gravure Japanese_Newspaper_OEM_Engine Lotem_Quantum Magnus_400 Magnus_800 Magnus_VLF Slave_MCE_Firmware Thermoflex Think_Motion_Controller Trendsetter_400/800 Trendsetter_NEWS Trendsetter_Series_4 The exposure head is online, but the monitor command requires application protocol 0. Application protocol 0 is a protocol that is backwards-compatible with Thermal 1.0 and Thermal 1.7x. Typically this error will indicate that the host and exposure head have negotiated a more recent application protocol that does not support the desired functionality. Although Tfx and Thermal 2 can be configured to support this monitor command ( by downgrading the firmware, disabling application protocol negotiation, etc ), it is preferable that this monitor command not be used with Tfx and Thermal 2. When the exposure head is coming online, the host and exposure head will negotiate the application protocol. The host will negotiate the highest application protocol and thus the most recent application protocol that is supported by both the host and exposure head. Note that Thermal 1.0 and Thermal 1.7x do not support application protocol negotiation. Do not use the monitor command or install a Thermal 1.0 or Thermal 1.7x exposure head. This error is reported. The host and exposure head have negotiated a more recent application protocol that does not support the desired functionality. 27-Jun-2002 ..\..\ShowAllErrors.htmFirmware 1 Error Index ..\..\ShowAllCommands.htmFirmware 1 Command Index ..\..\ShowAllParameters.htmFirmware 1 Parameter Index Updated: Thu Jul 17 07:23:40 2008 PST